✓ TradeExamPro

TradeExamPro › Fire & Security › Portable fire extinguisher technician

Inspection practice questions

25 questions from the portable fire extinguisher technician practice test.

Inspection practice test

10 questions, graded as you go, with the reason for every answer. No sign-up.

What this covers

Sample questions

What is the main difference between an inspection and maintenance of an extinguisher?

  1. Inspection is done by the fire marshal; maintenance is done by the building owner
  2. Inspection is a quick visual check; maintenance is a thorough examination
  3. Inspection includes discharging the unit; maintenance does not
  4. Inspection is done on the bench; maintenance is done on the wall
Show the answer

B. Inspection is a quick visual check; maintenance is a thorough examination

An inspection confirms the unit is where it belongs, visible, accessible and apparently charged and undamaged. Maintenance examines the mechanical parts, agent and expelling means and corrects problems.

Reference: NFPA 10: inspection, maintenance and recharging

Who may perform the monthly inspection of extinguishers under NFPA 10?

  1. The owner or any person who knows what to check
  2. Only a state-licensed extinguisher technician
  3. Only the local fire department inspector
  4. Only the manufacturer's field representative
Show the answer

A. The owner or any person who knows what to check

The monthly check does not require certification, so the owner's staff can do it. Maintenance, recharging and testing are what must be done by trained and certified persons.

Reference: NFPA 10: inspection; personnel

Which of these is part of a monthly inspection?

  1. Removing the valve and examining the shell interior
  2. Discharging a small amount of agent as a test
  3. Checking that the pressure gauge is in the operable range
  4. Testing the hose for electrical conductivity
Show the answer

C. Checking that the pressure gauge is in the operable range

The monthly check covers location, access, visibility, gauge reading, fullness by lifting or weighing, seals, instructions and obvious damage. Internal work and conductivity tests belong to maintenance.

Reference: NFPA 10: inspection procedures

Other topics